Full Set of Top Cylinders - R170 SLK-Class
There are two options for placing your order:
1. (Most affordable) You send in your leaking cylinders, and Top Hydraulics rebuilds them.
- Top Hydraulics replaces & upgrades ALL seals in your cylinders with our superior proprietary material including rod seals, gland seals, port seals, plug seals and piston seals. Top Hydraulics' u-cup seals have a far more reliable seal and much longer service life.
OR
2. (Fastest) Core Exchange Option where Top Hydraulics ships parts from our inventory first ($675 plus a $500 deposit).
- Option 2 means that you get a set of rebuilt & upgraded cylinders from Top Hydraulics' inventory first, then you ship back your original set for credit of your $500 core refund. You get a full set that has been rebuilt to outlast and outperform OEM replacements.
Unlike anyone else, Top Hydraulics replaces and upgrades all port seals (where the hoses go in).
No sales tax for orders in the USA
We provide world class technical support
3-year standard warranty (should last decades)
Full Set of Top Cylinders - R170 SLK-Class
Years: 1998-2003/2004
There are five hydraulic cylinders actuating the SLK convertible top and trunk lid. Top Hydraulics' rebuild makes these parts better than new inside, on account of the far superior seal material and seal geometry used. Of course, we are using cup seals where the shaft slides through when the cylinder shaft extends or retracts.
It is also important to replace all port seals, which is where the hoses go in. Please see our illustrations below (on the bottom of this listing) on how Top Hydraulics performs this intricate upgrade!
When considering the labor involved in removing one cylinder compared to a full set of cylinders, it is usually best to have all cylinders upgraded at the same time. The reason is, the majority of the labor involved is in removing access panels, and once the panels are removed, it is comparatively not much more work to remove all cylinders at once. Remember, the rebuild service for all cylinders at once costs less than one a single replacement cylinder from Mercedes, and you get a much better product from Top Hydraulics...
Download R170 SLK-Class Cylinder Removal Instructions (PDF)
Also see the link below for our very detailed DIY videos.
Top Hydraulics offers two options for upgrading cylinders for Mercedes convertible tops.
For Rebuilding Your Cylinders: Send your parts to Top Hydraulics first and we will rebuild and upgrade them to better-than-new condition.
To order with Core Exchange: Core deposit will be refunded in full if we receive your matching cores within 60 days, the cylinder rods are unscratched, and the hydraulic lines are intact. Core exchange (where Top Hydraulics ships rebuilt parts from its inventory first) is $150 more in the end, even after refund of the core deposit.
Seals used by Top Hydraulics, Inc. include Viton™ and Teflon™-hybrid seals, as well as enhanced Polyurethane material, which far exceed the OEM's requirements for rigidity, but provide at least double the service life for your convertible car top actuators, based on scientific test data.
Hydraulic lines must be intact and attached to the cylinder(s).
Mercedes part numbers for the five cylinders in the set:
A 170 800 00 72
A 170 800 02 72
A 170 800 03 72
A 170 800 05 72
A 170 800 06 72
Watch our DIY removal video on YouTube below!
About the port seals:
At the age of the original parts, it is essential that the port seals (where the hoses go into the cylinder housing) get replaced. Of course, we are replacing them with a far superior version. Replacing the port seals requires some fancy machining and extra parts:
-On the front lock cylinder, we machine out the crimps in the aluminum cylinder housing, create a clear mounting surface and tap holes for clips, then we re-fasten the hydraulic lines with laser-cut, stainless steel clips.
-On the main lift cylinders, we machine out the crimps in the aluminum cylinder housing, create a clear mounting surface and tap holes for clips, then we finally re-fasten the hydraulic lines with laser-cut, stainless steel clips.
-On the trunk lid cylinders, we machine out the crimps in the steel tubes that the hoses go into, cut a thread around the steel ports, then re-fasten the hoses with CNC-machined sleeves.
In the end, you get parts from us that are far better than new ones inside at a fraction of Mercedes' list price.
R170_CYL_SET |
Specific References
Reviews (1)
I just want to thank TopHydraulics for there dedication to providing the best option for building the roof systems in all Hydraulic convertables I really appreciate the fast shipping and I am very happy for my rebuild keep up the good work. The video put the entire job in perspective and all the things that where important in paying attention to<br /> in the process. Thank a million